Aqualens Sphere Fountain

Sphere Fountain is based on a 2 foot (60cm) diameter acrylic sphere, filled and overflowing with water from a concealed pump. The AquaLens Sphere Fountain sets this on a circular, stainless steel platform, which in turn is set in a 5 foot (1.5m) diameter marine-grade 316 stainless steel contact-lens dish. The pool can be dug into a lawn, or set on a terrace or other firm level surface (the pool has a fitted collar so it sits level).

We can create the Aqualens Sphere Fountain stainless steel dish and acrylic sphere in any size. The sphere fountain is also available with an internal LED light.

Glass Ball Sphere Fountain Size Comparison

The Aqualens Sphere Fountain arrives fully assembled complete with everything you need.
Just unwrap and place on a solid level surface.
Peel off protective layer on the plate under the sphere.
Solid level surface must be a minimum of 26 inches/ 65 cm in diameter.
Place the sphere in the channel and fill the base with a hose.
When the dish is full, turn on the pump and continue to fill until both the sphere and fountain are full.
Please keep pump on and running 24/7
Any bubbles that accrue can be dissipated with a squirt of rinse aid (product used in dishwashers).
It is essential that you keep it free of algae with the use of chlorine tablets.

Starting from $14,480*

*For a 2-foot Sphere Fountain set in a 4-foot 316 Marine-Grade Stainless Dish.

Contact Allison to Order

Recent Customer Photos

Allison’s first Aqualens Sphere Fountain was designed as the centerpiece of her award-winning “garden of reflection” at the 2000 Chelsea Garden Show. Since then, Allison has installed her Aqualens Sphere Fountains at restaurants, universities, corporate campuses, stores, and private residences all over the world.

Aqualens Sphere Fountains are available in a variety of sizes and configurations, and are designed to work well in both indoor and outdoor settings – as well as most climates. As the globe in the sphere fountain reflects it’s surroundings like a giant crystal ball, the sphere fountain enhances both modern and traditional garden settings.

The dishes on the aqualens may have minor imperfections due to the nature of the spinning process.

Benefits of Acrylic Sphere Fountains vs. Glass Sphere Fountains:

Aqualens Sphere Fountains appear to be constructed using glass globes, however the beautiful clear spheres are actually made of either free blown or bonded acrylic.

When it comes to water fountains and water features, glass isn’t all that it’s ‘cracked up’ to be. Acrylic has nearly the same optical qualities as glass while being less expensive, lighter-weight (so less expensive to ship), stronger, and less fragile.

Take a look at some of the photos on this page, and I think you’ll agree that acrylic spheres look every bit as impressive as glass spheres. In fact, they look exactly like a glass ball fountain.

Acrylic is stronger than glass while also being as much as 4x lighter
It’s less expensive to form and replace large acrylic spheres for fountains than it is to create large glass spheres
Acrylic spheres weighs less and cost less to ship – and are much more likely to arrive in one piece
Acrylic is more easily scratched than glass, however it’s much easier to repair and to remove scratches from acrylic (there are many polishing kits available)
Impacts that only scratch acrylic are likely to break glass. Replacing a large glass sphere is very expensive. Polishing a scratch out of acrylic is inexpensive

The best part is that acrylic spheres are virtually indistinguishable from glass spheres. When the sphere fountains are in operation I think it’s next to impossible to tell. Every water feature and water fountain on this site is constructed using an acrylic sphere – not a glass sphere. I think the pictures speak for themselves!

The Aqualens Sphere Fountain arrives fully assembled complete with everything you need.
Just unwrap and place on a solid level surface.
Peel off protective layer on the plate under the sphere.
Solid level surface must be a minimum of 26 inches/ 65 cm in diameter.
Place the sphere in the channel and fill the base with a hose.
When the dish is full, turn on the pump and continue to fill until both the sphere and fountain are full.
Please keep pump on and running 24/7
Any bubbles that accrue can be dissipated with a squirt of rinse aid (product used in dishwashers).
It is essential that you keep it free of algae with the use of chlorine tablets.
Only use 1-inch chlorine tablets for hot tubs: Keep at least 3 in the standard-size fountain at any given time, preferably in a tupperware dish, hidden under the
platform. Use About 5 tablets for the larger fountains.
The sphere should be crystal clear at all times.
The sphere should be removed and taken inside if there is no water in it, as direct sunlight without water may damage the sphere.

Refill Instructions

Fill the pool with water, and once the water is above the top of the pump unit, turn on the pump power. This will allow the water to be pumped into the sphere.
Continue filling the dish until the sphere is full and water flowing down the outside.
Top up the water in the pool to the desired level (we recommend a water level just above or just below the platform).

We know from experience that AquaLens and AquaSphere work in a variety of conditions in many countries. However, please note the following:

The pump will suffer if the water level falls below the top of its inlet, or the pump inlet becomes blocked.
Water may evaporate during hot conditions.
When the Aqualens is full and running, it is fine in windy conditions. If it is turned off and empty, the sphere needs to be brought inside as it could
then be blown off in the wind.
In freezing (moderate) conditions keep the pump running since the water movement inhibits freezing.
Ice sometimes forms on the outside of the sphere (rather nice ice sculptures) but take care if the ice causes the water level to fall below the pump inlet.
If the weather is really cold turn off and drain down.
AquaLens and AquaSphere have hard surfaces and edges, so appropriate care needs to be taken to avoid accidental injury.
Replacement pumps and lights are available from garden and electrical suppliers, and can be fitted by a competent person, contact us if you have difficulty, or require further information.
The light is easily accessible from the underside of the platform, which may be unscrewed

We are committed to providing high-quality, durable products that enhance your outdoor living space. To ensure your complete satisfaction, we offer the following warranty for your Aqualens Sphere Fountain:

1-Year Warranty on All Components

Your Aqualens Sphere Fountain is covered by a 1-year warranty from the date of purchase. This warranty applies to all parts and components of the fountain, including the pump, sphere, and platform (excluding the stainless steel dish, which has a separate warranty as outlined below). If any of the components fail due to defects in materials or workmanship under normal use, we will repair or replace the defective parts free of charge.

5-Year Warranty on Stainless Steel Dish

The stainless steel dish that accompanies your Aqualens Sphere Fountain is covered by a 5-year warranty against rust. This warranty ensures that the stainless steel dish will remain free from rusting, provided the fountain is used and maintained as per the provided instructions. This warranty does not cover damage caused by contamination, including exposure to harsh chemicals, saltwater, or other corrosive substances. In the unlikely event that rust appears on the dish during the warranty period, we will replace it free of charge.

Click Here to read the full warranty →

View Aqualens Gallery →

View Project Gallery →

View PricesContact Allison